Ecodor United Kingdom

Removing urine odour from carpeting or fabric furniture with UF2000
IMPORTANT!!
Always check beforehand that the material that is to be treated will retain its colour, by testing the product in an inconspicuous area!

For recent urine stains:

Preparation:

  • Determine the location of the urine. If it is difficult to determine the exact location of the urine, please use our urine stain detector.
  • Do not use other (chemical) detergents or masking agents. Also do not use shampoo. If you plan to shampoo or clean your carpet, then do so after you have removed both urine odour and urine stains with UF2000.
  • First remove as much urine as possible by dabbing with kitchen towel. Do not press with your shoe, as you may further spread traces of urine in your carpeting or rug. Preferably use protective plastic gloves. Use your hands to press the kitchen towel, and afterwards thoroughly wash your hands with soap.

Gebruik_van_UF2000Application:

  • Using a trigger spray bottle or low pressure pump spray bottle (plant sprayer or pesticide sprayer) spay to saturate the affected area, and any underlying layers. For optimum results use as much UF2000 as there is urine.
  • Allow the UF2000 to draw into everywhere that the urine has affected the material.
  • Leave to dry naturally.
  • Once dry, remove any residue by dabbing the affected area with a paper (kitchen) towel and a little water.  It is important to do this, since the residue can otherwise attract dirt.

For old, dried urine stains:
It is possible that repeated urine applications have damaged the colour of your carpet of fabric. Even complete urine removal with UF2000 can not repair this damage.

Preparation:

  • Determine the location of the urine. If it is difficult to determine the exact location of the urine, please use our urine stain detector.
  • Do not use other (chemical) detergents or masking agents. Also do not use shampoo. If you plan to shampoo or clean your carpet, then do so after you have removed both urine odour and urine stains with UF2000.
     

Application:

  •  Using a trigger spray bottle or low pressure pump spray bottle (plant sprayer or pesticide sprayer) spay to saturate the affected area, and any underlying layers.
    UF2000
    Order now! 
    For optimum results use as much UF2000 as there is urine.
  • Allow the UF2000 to draw into everywhere that the urine has affected the material.
  • Cover with a piece of plastic to make sure the UF2000 can work for a longer period, by not evaporating as quickly. After applying the UF2000 spray, the urine odour may become a bit stronger at first. This is because the urine is dissolving and being drawn to the surf ace. 
  • After several hours, remove the plastic, and dab the wet area with a paper (kitchen) towel.
  • Repeat these steps over a number of days, until the urine stain is no longer visible or until the odour has gone. In some cases 3 to 4 treatments may be required.
  • Once dry, remove any residue by dabbing the affected area with a paper (kitchen) towel and a little water.  It is important to do this, since the residue can otherwise attract dirt.